volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With Manufacturer's Scan Tool|Page 3844 > < With Manufacturer's Scan Tool
Page 2
background image

-

The main fuses must be OK

-

The battery voltage must be at least 11.5 V. 

Test sequence 

-

Remove engine cover.

-

Remove discharge hose on air pump motor.

Note:  Press the buttons on the hose couplings together.

-

Remove windshield wiper arms and cowl.

-

Connect VAG 1598/31 test box to control unit wiring.

-

Switch ignition on.

-

Bypass jacks 3 + 46 on test box using auxiliary cables from VAG 1594.
The air pump motor should run and air should be coming out the exhaust nozzles.

If the motor is running, but no air is coming out:
-

Switch ignition off.

-

Replace air pump motor V101.

If the motor does not start:

With Manufacturer's Scan Tool|Page 3844 > < With Manufacturer's Scan Tool