volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With Generic Scan Tool|Page 3903 > < With Generic Scan Tool|Page 3901
Page 2
background image

-

Fuse no. 43 must be OK.

-

The battery voltage must be at least 11.5V

Test sequence

-

Remove fender liner rear right:

-

Disconnect 3-way plug of leak detection pump (V144) -arrow-.

-

Connect VAG 1527 B adapter cable between contact 3 (Plus) of plug and ground.

-

Start engine an let it run at idle.
The LED should be ON.

-

Turn off ignition.

If the LED does not light:

With Generic Scan Tool|Page 3903 > < With Generic Scan Tool|Page 3901