Jetta GLS VR6 V6-2.8L (AFP) (2001)
-
Remove shock absorber bolt -1- on rear axle.
NOTE: For ease of illustration work sequence is shown without wheel.
-
Remove shock absorber.
-
Install in reverse sequence
Tightening torque:
Shock absorber to rear axle 60 Nm (44 ft. lbs.)
Use new nuts!
Load rear of vehicle with one person when tightening
Shock absorber to body 75 Nm (55 ft. lbs.)
Use new bolts!
Shock Absorbers Vehicles With FWD, Assembly Overview
1. Gas-filled shock absorber
^
Can be replaced individually
Replacement parts catalog
^
Checking shock absorber for leaks and noises
Special Information Suspension Wheels Steering No. 3
^
Disposal: observe environmental regulations
Functional check
Press shock absorber together by hand. Piston rod must move over its complete length smoothly with even force.
When shock absorber has sufficient gas pressure piston rod returns to its original starting Position.