Jetta GLS VR6 V6-2.8L (AFP) (2001)
Shift Interlock Cable: Service and Repair
4 Speed Automatic 01M, Locking Cable, Remove & Install
Locking cable, removing and installing
Removing
Installation position of locking cable
1. Footwell vents
2. Support/instrument panel
3. Heater unit
-
Obtain radio code on vehicles with coded radio.
-
Disconnect battery ground strap.
-
Pull locking cable clip upward off ignition switch. In addition, it may be necessary to
-
Remove steering wheel, left trim under instrument panel, steering column trim and steering column adjustment handle to create more space.
-
Turn ignition key to "ignition on" position.
-
Shift selector lever into "P" position.
-
Pull out clip -2- for locking cable -3-.