Jetta GLS Wagon L4-1.8L Turbo (AWP) (2002)
^
Guide switch through mounting hole (only fits in one position).
^
Seat switch fully into opening (pressing plunger against pedal to adjust.
^
Seat switch by turning it 45° clockwise. This action also turns the plunger shoe into the correct orientation to make electrical contracts in
switch operate as well as locks in plunger adjustment.
^
Connect brake light switch connector.
^
Operate brake pedal to verify proper function.
^
Reinstall lower cover panel.
4
Accelerator - pedal
5
Hex bolt
6
Brake pedal
7
Pad
8
self-locking nut
^
20 Nm (15 ft. lbs.)
^
Always replace
9
Bushing
10
Pivot pin