volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Engine Coolant Temperature (ECT) Sensor - Checking|Page 2322 > < Engine Coolant Temperature (ECT) Sensor - Checking|Page 2320
Page 5
background image

-

Pull 4 pin connector off Engine Coolant Temperature (ECT) sensor (G62) with coolant temperature gauge sender (G2) -arrow-.

-

Check wiring between test box and 4-pin connector for open circuit using wiring diagram.
Contact 3+socket 93
Contact 4+socket 108
Wire resistance: Max. 1.5 Ohm

-

Check wiring between test box and 4-pin connector contact 3 for short circuit to wire contact 4 and to vehicle Ground (GND) using wiring
diagram.
Contact 3+socket 108
Contact 3+vehicle Ground (GND)
Specification: Infinity Ohm

-

Additionally check both wires for short to battery positive.

If no fault in wire is detected:

Engine Coolant Temperature (ECT) Sensor - Checking|Page 2322 > < Engine Coolant Temperature (ECT) Sensor - Checking|Page 2320