Jetta GLS Wagon L4-1.8L Turbo (AWP) (2002)
-
Install both bearing caps at chain sprockets for intake and exhaust camshafts. Check camshafts are positioned correctly and tighten bearing cap to
10 Nm (remember dowel sleeves).
-
Remove retainer for chain tensioner 3366.
-
Coat hatched area of double bearing cap lightly with sealant D 454 300 A2, install and tighten to 10 Nm (remember dowel sleeves).
-
Install remaining bearing caps and tighten to 10 Nm (remember dowel sleeves).
-
Observe installation position.
-
Install camshaft sprocket. Bevelled edge of camshaft faces outward -arrows- and TDC Cyl. 1 is visible at front
-
Tighten securing bolt to 65 Nm (use counter-hold tool 3036).