Jetta GLS Wagon L4-1.8L Turbo (AWP) (2002)
-
Fit battery hold-down bracket and tighten M8 x 25 securing bolt to 22 Nm.
-
Reinstall insulation jacket where applicable.
-
Install positive clamp onto battery positive terminal.
NOTE:
-
Battery terminal clamps must only be fitted by hand without force, this prevents damage to battery housing.
-
Battery terminals must no longer be greased.
-
Tighten battery positive terminal clamp securing screw to 6 Nm.
-
Fit fuse holder onto battery and install positive bus onto securing pins on battery positive terminal.
-
Engage fuse holder clip in battery.
-
Tighten securing bolt -1- for positive bus on (+) positive terminal clamp.
-
Connect cables to strip fuses again and tighten securing bolts -A-.
-
Fit connections -2-.
-
Only after the fuse holder and positive terminal have been secured should the negative terminal clamp be installed.
-
Tighten securing bolt to 6 Nm.