Jetta GLS Wagon L4-1.8L Turbo (AWP) (2002)
Shift Interlock Cable: Adjustments
5 Speed Automatic 09A, Locking Cable, Adjusting
Locking cable, adjusting
CAUTION: The description below for the adjustment of the locking cable must be strictly adhered to.
Adjustment prerequisites:
-
Locking cable correctly fitted
-
Center console removed
-
Selector lever in position "P"
-
Ignition key in removal position
Adjustment sequence:
-
Steering wheel is in rear/lower position.
-
Unscrew bolt from support bracket.
-
Position locking cable adjustment gauge 3352 A between locking lever -1- and locking cable eye -2-.
-
To take up play, pull support bracket onto stop in direction of arrow.
-
Locking cable adjustment gauge 3352 A must be easy to remove and insert in this position.
-
Tighten bolt on support bracket (10 Nm).
-
Remove adjustment gauge.
-
Check operation of ignition key withdrawal lock.