Jetta GLS Wagon L4-1.8L Turbo (AWP) (2002)
/Page-1280003.png)
^
Turn stop -A- of clutch pedal in direction of arrow and remove.
^
Push master cylinder first in direction of arrow -1- onto stop.
It must not be covered in upper area by over center spring mounting (arrow -2-).
^
Swing it in direction of arrow -3- out of mounting bracket.
Installing
Installation is carried out in the reverse sequence. When installing note the following:
^
Retainer -A- must be on clutch master cylinder operating rod -B-.
^
Pull piston rod out of master cylinder slightly and hold using a pair of pliers.
^
Push clutch pedal in direction of arrow to engage it, and make sure it is located correctly.
^
Install stop -A- for clutch pedal again.
