Jetta GLS Wagon L4-1.8L Turbo (AWP) (2002)
/Page-1282002.png)
^
Install overcenter spring together with assembly device T101 11 in direction of arrow -A- into support. When doing this turn in direction of arrow
-B-.
^
Install overcenter spring on support in rear -arrow A-.
^
Press clutch pedal to bulkhead until overcenter spring lies against clutch pedal bearing tab -arrow B-.
^
Make pedal recede even more, until it is in rest position, and remove assembly device.
^
Install cover/lower drivers side.
