Jetta GLS Wagon L4-2.0L (AZG) (2002)
^
25 Nm (18 ft. lbs.)
^
Black
12. Oil filter flange
^
With 4 bar (58 psi) relief valve
13. 15 Nm (11 ft. lbs.) + 1/4 turn (90°)
^
Always replace
^
Measure torque angle with torque angle wrench, i.e. Hazet 6690
14. Seal
^
Always replace
^
Install into groove on oil cooler
15. Oil cooler
^
Coat mounting surface of oil filter flange outside seal with sealant AMV 188 1 00 02
^
Allow room for surrounding objects
16. 25 Nm (18 ft. lbs.)
17. Oil filter
^
Loosen with strap wrench
^
Hand tighten
^
Observe installation instructions on oil filter