Jetta GLS Wagon L4-2.0L (AZG) (2002)
Seat Belt: Testing and Inspection
Seatbelts, Inspecting
Seatbelts, Inspecting
CAUTION: seatbelt system is to be systematically checked after every accident! If damage has been found according to check points, customer
is to be notified of necessity of a seatbelt replacement.
Check points
-
Check belt webbing
-
Check automatic retraction (locking effect)
-
Visual check of belt latch
-
Function check of belt latch
-
Checking guide stops and seatbelt lock tongue
-
Check anchoring components and anchoring points
-
Checking lap belt automatic retractor.
NOTE: Make a note if customer refuses to allow replacement of damaged seatbelt.
Belt webbing, checking
-
Check belt webbing for soiling, wash with mild soap solution if necessary. - Also refer to Owners Manual.
-
If one kind of damage (belt webbing cut, torn or chafed) or (webbing loops on belt edge torn) shown in following is detected on a vehicle
which has been in an accident, replace seatbelt complete with belt lock.
-
If one kind of damage described in following is detected on a vehicle which has not been in an accident, only damaged seatbelt needs to be
replaced.
Possible damage
Belt webbing cut, torn or chafed
Webbing loops on belt edge torn.