volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With Manufacturer's Scan Tool|Page 1117 > < With Manufacturer's Scan Tool|Page 1115
Page 5
background image

-

Disconnect 5-pin connector from Mass Air Flow (MAF) sensor -G70- with Intake Air Temperature (IAT) sensor -G42- (arrow).

-

Check for open circuits in wires between test box and the 5-pin connector according to wiring diagram.
Terminal 1 and test box socket 26
Terminal 3 and test box socket 27
Wire resistance: max: 1.5 Ohms

-

Also check wires for short circuits to each other, to vehicle Ground (GND) and to B+.
Specification: Infinity Ohms

If wiring is OK:

With Manufacturer's Scan Tool|Page 1117 > < With Manufacturer's Scan Tool|Page 1115