Jetta GLS Wagon L4-2.0L (AZG) (2002)
/Page-1458004.png)
^
Fill space between sealing lip and dust lip with grease G052 128 A1.
^
Insert flanged shaft.
^
Secure flange shaft with countersunk bolt and tighten to specified torque.
^
Install drive shaft.
^
Connect ball joint to control arm using new bolts at old impression marks
^
Install wheel.
^
Check transmission oil.
^
Install sound insulation tray.
Tightening torques
Flanged shaft to transmission (conical head bolt) ....................................................................................................................................................... 25 Nm
