volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Power Supply and Cables Check|Page 3379 > < Power Supply and Cables Check|Page 3377
Page 7
background image

-

Disconnect 6-pin harness connector from throttle valve control module (arrow).

-

Connect multimeter to measure voltage at terminals -2- and -6-.

-

Switch ignition on.
Specified value: min. 4.5 V

-

Switch ignition off.

-

Connect multimeter to measure voltage at harness connector terminal -2- and Ground.

-

Switch ignition on.
Specified value: min. 4.5 V

-

Switch ignition off.

Power Supply and Cables Check|Page 3379 > < Power Supply and Cables Check|Page 3377