Jetta GLX Wagon V6-2.8L (AFP) (2001)
/Page-926003.png)
If DTC memory has been erased or the Engine Control Module (ECM) was disconnected from permanent battery (B+) voltage, the readiness code
must be generated again.
Evaluating display group 4, display field 3 - Coolant temperature
Display Group 4, Display Field 3
Continuation of check when display approx. -40 °C:
-
Disconnect 4-pin harness connector from Engine Coolant Temperature (ECT) sensor -G62- with Engine Coolant Temperature (ECT) sensor -G2-
(arrow).
