Jetta GLX Wagon V6-2.8L (AFP) (2001)
-
Connect VAG1598/31 test box to Engine Control Module (ECM) wiring harness. Engine Control Module (ECM) is not connected by this action.
-
Remove protective cover (arrows) and disconnect 6-pin harness connector (black) -1- from Heated Oxygen Sensor (HO2S) -G39- before Three
Way Catalytic Converter (TWC).
-
Check wiring for open circuit between test box and 6-pin harness connector (to control module) according to wiring diagram.
-
Terminal -1- + socket 70
-
Terminal -2- + socket 71
-
Terminal -5- + socket 51
-
Terminal -6- + socket 52
-
Wire resistance: Max. 1.5 ohms