volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

With Manufacturer's Scan Tool|Page 4062 > < With Manufacturer's Scan Tool|Page 4060
Page 5
background image

During the road test the following conditions must be fulfilled:

-

Coolant temperature must exceed 85 °C.

-

When temperature is reached, operating conditions Idling, Part throttle, Wide Open Throttle (WOT), and Overrun must be attained several times

-

At Wide Open Throttle (WOT) engine speed must exceed 3500 RPM

-

Again, check DTC memory of control module.

If the malfunction is still present:

-

Replace knock sensor/s -G61- or -G66- Refer to item 15 or item 11 under "Ignition System", See: Service and Repair 

-

Check DTC memory. If necessary, repair any malfunctions and erase DTC memory.  

-

Display readiness code.   

If DTC memory has been erased, or Engine Control Module (ECM) was disconnected from permanent battery (B+) voltage, readiness code must
be generated again.

With Manufacturer's Scan Tool|Page 4062 > < With Manufacturer's Scan Tool|Page 4060