Jetta GLX Wagon V6-2.8L (AFP) (2001)
/Page-1827003.png)
-
When keypad appears, select "1" then press "Q".
Four status checks will be shown
^
Driver's side airbag status
^
Passenger's side airbag status
^
Driver's seat belt tensioner status
^
Passenger's seat belt tensioner status
One of the following conditions will be indicated:
^
CORRECT = system operating properly (see note below)
^
TOO LOW = insufficient voltage drop in Driver's side airbag system (Short)
^
TOO HIGH = Excessive voltage drop in Driver's side airbag system (Open)
The following procedure is for a Display that reads "CORRECT" or "TOO LOW" In the top row (arrow) (Driver's side airbag status).
For all other Display conditions:
-
Return to Repair Manual or Technical Bulletin Group 01 number 00-02 dated Apr. 24, 2000 for additional diagnosis.
Display (in top row) reads TOO LOW:
-
Access connector at lower Spiral spring assembly by removing lower steering column trim cover (see VESIS Group 70)
While monitoring Display group 1:
