Jetta GLX Wagon V6-2.8L (AFP) (2001)
/Page-334003.png)
-
Disconnect white 3-pin harness connector to knock sensor 1 (arrow).
Knock Sensor (KS) 2 -G66-
-
Disconnect brown 3-pin harness connector to knock sensor 2 (arrow).
-
Measure resistance between knock sensor terminals -1- + -2-, -1- + -3- and
Specified value: infinity ohms
-
Remove wiper arms and plenum chamber cover.
If the specification is not obtained:
-
Replace Knock Sensor (KS) 1 -G61- or replace Knock Sensor (KS) 2 -G66-. Refer to item 15 or item 11 under "Ignition System", See: Powertrain
