Jetta GLX Wagon V6-2.8L (AFP) (2001)
/Page-1456002.png)
-
Install battery so lug of battery carrier (arrow) engages in battery foot strip cut-out -1-. It must not be possible to move a battery to the left or to the
right.
-
The battery is correctly installed when the center cut-out in the battery foot strip aligns with threaded hole in the battery carrier (arrows).
-
On batteries with hose for central venting, ensure hose is not kinked. Only then can battery vent freely.
-
On batteries without hose for central venting, ensure opening on upper side of battery cover is not blocked.
-
Install clamping bracket and tighten securing bolt -3- (M8 x 25) to 22 Nm (16 ft. lb).
-
Re-install battery case -2- together with heat protection jacket.
-
Fasten battery case with securing bolt -1-.
-
Secure (+) positive terminal clamp -2- to positive terminal on battery.
NOTES:
-
The battery terminal clamps may only be secured by hand without force in order to prevent damage to the battery housing.
-
Battery terminals may no longer be greased.