Jetta GLX Wagon V6-2.8L (AFP) (2001)
/Page-1143001.png)
Pinion Gear: Adjustments
4 Speed Automatic 01M
Drive pinion, adjusting
Special tools and equipment
-
VW 385/17 End dimension plate
-
VW 387 Universal dial gauge bracket
-
Dial gauge
Conditions:
-
Supporting ring for drive pinion bearing is installed and secured.
-
Parking lock mechanism and parking lock gear are installed.
Adjusting:
-
Place two shims (each 1.5 mm thick) -arrow- onto drive pinion.
-
- Place output gear with tapered roller bearing onto drive pinion and tighten hex nut (41 mm AF) to 250 Nm; engage parking lock when
performing this step.
