Jetta GLX Wagon V6-2.8L (AFP) (2001)
-
Self adhesive Bond to gear lever housing
12. Gasket
-
Between selector cables and gear lever housing
13. Selector housing
14. Gasket
-
Self adhesive
-
Bond underneath gear lever housing
15. Cover plate
16. Hex combi bolt, 25 Nm
Fig. 1 Separating cover from gear shift knob and assembling to gear shift knob
-
Turn boot inside out.
-
Carefully pry segment with a screwdriver in direction of arrow and simultaneously pull gear shift knob out.
Installation is carried out in the reverse sequence. Also, note the following:
-
Insert gear shift knob in cover.
-
Push sleeve onto gear shift knob and engage.
-
Install gear shift knob and boot together.