Jetta III L4-1.9L DSL Turbo (AAZ) (1993)
-
To remove and install brake drum work through wheel bolt hole to push wedge up
16
Push rod
-
Lubricate contact points with G6 grease
17
Locating spring
Removal
-
Remove brake drum, refer to Replacement. See: Brake Drum/Service and Repair
-
Remove spring retainers and unhook lower return spring.
-
Remove brake shoes.
-
Unhook parking brake cable.
-
Clamp brake shoes in vice.
-
Remove wedge spring (right arrow) and upper return spring (left arrow).
-
Unhook locating spring (arrow).
Installation
-
Connect locating spring and insert brake shoe into slot in push rod.
-
Insert wedge.
-
Insert brake shoe with brake lever in push rod.
-
Connect upper return spring.