Jetta III L4-1.9L DSL Turbo (AAZ) (1993)
Ribbed Belt: Service and Repair
With Tensioner
SPECIAL TOOLS
^
Lever tool No. 3299, or equivalent.
REMOVAL
1. Lift tensioning roller with lever and remove ribbed drive belt from the alternator pulley.
2. Remove power steering pump V-belt.
3. Remove ribbed drive belt.
INSTALLATION
1. Place ribbed drive belt on crankshaft pulley/vibration damper and water pump pulley.
2. Install power steering pump V-belt.
Models With Automatic Tensioner Less Air Conditioning
Models With Automatic Tensioner And Air Conditioning
3. Lift tensioning roller using tool lever and install ribbed drive belt.