Jetta III L4-1.9L DSL Turbo (AAZ) (1993)
- Install onto spring supporting ring
10 - Spring supporting shell
11 - Circlip
- Must be installed in groove of clutch housing
12 - Diaphragm spring
- Install with curved side facing piston
13 - Piston
- Sealing lips are vulcanized to piston
- Moisten with ATF before installing
- Turn piston slightly while installing
14 - Clutch housing with pump shaft
15 - Piston ring
- Replace only faulty piston rings
- Piston ring is destroyed when removed
- Check that ring is correctly located - Fig. 2
- Installing - Fig. 3
16 - Piston ring
- Check that ring is correctly located - Fig. 2
- Installing - Fig. 3
17 - Piston ring
- Check that ring is correctly located - Fig. 2
- Installing - Fig. 3
Fig. 1
Fig. 1 Removing and installing circlip (arrow)
Fig. 2
Fig. 2 Checking that piston rings are correctly located
- Make sure that ends of piston rings are hooked together.