Jetta III L4-1.9L DSL Turbo (AAZ) (1993)
-2-.
-
On brake pedal side, remove retaining clip from pivot pin.
Insert screwdriver below tab -A- and press off toward instrument panel (in direction of arrow).
-
Pull pivot pin to right and remove clutch pedal.
INSTALLATION
-
Install clutch pedal in reverse order of removal.
NOTE: Before installing the retaining clip, position the pedal pivot pin so that the recesses -B- are vertical, as shown in the above illustration.
-
After installing clutch pedal, check operation of clutch cable adjustment mechanism.