Jetta III L4-1.9L DSL Turbo (AAZ) (1993)
-
Installing final drive gear
^
Heat gear to approx. 100°C (212°F) before installation
^
Use bolts (A) from repair kit to guide final drive gear on during installation
-
Attaching final drive gear to differential housing
^
Special bolts, washers and nuts - part no. 171 498088 A (repair kit)
^
Tighten to: 65 Nm (48 ft lb)
2
Special rivet
-
Secures shaft for differential gears
-
When repairing differential, secure shaft with circlips after removing rivet