Jetta III L4-2.0L (ABA) (1995)
Front Door Exterior Handle: Service and Repair
Removing;
-
Insert key in door handle lock cylinder (driver's door only).
-
Remove socket-head screw with collar -2-.
-
Slide door handle forward.
-
On driver's door only, turn key 1/4-turn or 90 ° (arrow).
Door handle carrier -3- releases operating lever -4-.
-
Pivot door handle out of door.
Installing:
On vehicles with central locking the carrier for the connecting rod -1- must be in vertical position - arrows- before inserting the door handle.
-
Check clip -1- for damage and replace if necessary.
-
Pivot door handle into place so that door handle slides past door panel without clearance (arrow).
-
Screw in socket-head screw -2-
Tightening torque: 8 Nm (71 in. lb)