Jetta III L4-2.0L (ABA) (1995)
Clock Reset Buttons
- press and hold the bottom digital clock reset button -1- or the analog clock reset button -2- until five dashes (-----) appear in display
^ OEL SRI is now reset for 7500 miles (12,000 km) or 6 months, whichever comes first
Once OEL is reset, if necessary, the other displays can now be reset in the same manner without switching the ignition on and off again.
- press odometer reset button to proceed to the IN 01 display (15,000 mile maintenance) and reset using the clock reset button
- if necessary, repeat procedure to reset the IN 02 (30,000 mile) maintenance display
To escape the reset mode,
- switch ignition on; when display IN 00 appears, switch ignition off
Service Reminder Indicator (SRI), programming
If the instrument cluster is replaced, the Service Reminder Indicator (SRI) must be programmed so that the correct displays will appear at the appropriate
mileage and time intervals.
To program the SRI displays,
- switch ignition on
- press and hold the odometer reset button -arrow- located below the speedometer
- while holding the odometer reset button, press the bottom digital clock reset button -1- or the analog clock reset button -2-, then release both buttons
Service Reminder Indicator (SRI) Display
^ the programming mode will be activated and OEL1.S will be displayed