Jetta III L4-2.0L (ABA) (1995)
-
Connect LED tester with adapter cables to terminals -1- and -15- on Ignition Coil.
WARNING: During the following test DO NOT touch the Ignition Coil or test leads terminals.
-
Switch ignition ON.
^
LED must light up for 1-2 seconds.
-
Operate Starter.
^
LED should flicker
-
If LED does not flicker:
-
Replace Ignition Coil Power Output Stage.
-
Connect connector to Fuel Injectors.
-
Reinstall fuse 18 (S18).