Jetta III L4-2.0L (ABA) (1995)
Repairs and Inspections Required After a Collision: Service and Repair
Air Bag System
Airbag units, replacing following an accident
Accident involving activation of airbag
-
Always replace the following:
-
All triggered airbag units
-
All control modules for triggered airbags
-
All sensors for triggered airbags
-
All seatbelts with triggered belt tensioners
-
Support for front passenger airbag unit, if unit is triggered
-
Airbag spiral spring/return spring with slip ring -F138- for drivers airbag if unit is triggered
-
Seat cover and cover clips, if side airbag is triggered
-
Visually check and replace all damaged components
Accident not involving activation of airbag
If the airbag Malfunction Indicator Lamp (MIL) -K75- does not indicate any malfunction, it is not necessary to replace any airbag component.
WARNING! The seat belts should be checked separately.
After replacing the airbag units or the airbag control module, attach stickers (only tear-off strips) to the registration card and return the card to relevant
dealer or to importer for registration.
Note:
When replacing either the airbag unit or the airbag control module -J234-, see your Parts Department for the proper registration procedure.