Jetta III L4-2.0L (ABA) (1995)
7
Link Rod
8
Rubber Mounting
-
Coat with lubricant (e.g. soft soap) before pressing in
9
Crossmember Mounting Bolt
-
Tighten to: 65 Nm (48 ft. lbs.)
10
Stabilizer Bar Mounting
11
Stabilizer Bar
12
Vibration Damper Mounting Nut
-
Tighten to: 25 Nm (18 ft. lbs.)
13
Clamp
14
Vibration Damper
15
Bolt
-
Tighten to: 25 Nm (18 ft. lbs.)
16
Subframe
-
Removing/installing, refer to Fig. 5
-
After installing, align front wheels if steering gear/subframe attachment has been loosened
-
Aligning engine and transmission assembly, refer to Engine.
17
Bolt
-
12 x 1.5 x 82 mm
-
Tighten to: 50 Nm (37 ft. lbs.) plus additional 1/4 turn (90°)
18
Bolt
-
12 x 1.5 x 65 mm
-
Tighten to: 70 Nm (52 ft. lbs.) plus additional 1/4 turn (90°)
19
Bolt
-
12 x 1.5 x 78 mm
-
Tighten to: 70 Nm (52 ft. lbs.) plus additional 1/4 turn (90°)
20
Front Bushing For Control Arm
-
Pressing out, refer to Fig. 1
-
Pressing in, refer to Fig. 2
21
Washer
-
Collar faces away from control arm
22
Stabilizer Bar Link Rod Nut
-
Tighten to: 25 Nm (18 ft. lbs.)
23
Cap Nut
-
Repairing, refer to Repair.
Fig. 1 - Front Bushing For Control Arm, Pressing Out