Jetta III L4-2.0L (ABA) (1995)
Fitting thrust plate and plates onto inner plate carrier
- Install thrust plate -a- with smooth side facing inner plate and stepped side towards inner plate carrier.
- Install 3 inner plates -b- and 2 outer plates -c-.
- Insert supporting ring with step (-arrow-) after installing thrust plate as well as inner and outer plates.
Note:
Locate locating lugs correctly.
Installing corrugated washer and inner and outer plates in clutch housing
- First insert corrugated washer.
- Insert 2 mm thick outer plate.
- Insert remaining inner and outer plates.
Inserting inner plate carrier and installing circlip (-arrow-).
- Lift inner plate carrier slightly to install circlip.
Checking that piston rings are correctly located