Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-1999003.png)
-
Using a screwdriver, lift retainer -1- off sensor for transverse acceleration -G200- -2-
-
Take out sensor for transverse acceleration -G200-.
Installing lateral acceleration sensor -G200-.
-
Insert lateral acceleration sensor -G200- into bracket.
-
Installation position: The slanted side (arrow) of the lateral acceleration sensor -G200- - 1- must face retainer -2-.
-
Slide retainer -2- over the lateral acceleration sensor -G200- -1- until it engages.
Further installation in reverse order
-
Enter radio code.
-
Perform basic settings of lateral acceleration sensor -G200- and Sender for rotation rate -G202-.
Tightening torques
