Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
-
Force piston out of brake caliper housing using compressed air.
Note: Place a piece of wood in the recess to prevent damaging the piston.
Only one piston at a time can be forced out. When doing this hold the other piston in the caliper using the piston resetting tool.
-
Remove protective seal out of piston groove using wedge 3409.
-
Remove piston.
Note: When removing ensure that the surface of the cylinder is not damaged.
-
Remove protective seal using wedge 3409.
-
Remove seal using wedge 3409.