Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
-
Place protective seal with the outer sealing lip on the piston.
-
Using wedge 3409, insert the inner sealing lip into the grove in the cylinder.
Note: Hold piston in front of caliper housing.
-
Screw piston into housing by turning knurled wheel clockwise.
Note:
^
Use special tool 3272/1 to help screw in.
^
If the piston is pushed back with a piston resetting tool or by operating the foot brake the automatic adjustment in the brake caliper is destroyed.
-
Install brake pads.
Pre-bleeding brake caliper