Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-2076001.png)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Control Module and Hydraulic Unit Mark 60, Removing and Installing
Control module and hydraulic unit Mark 60, removing and installing
Special tools and equipment
^
VAG 1331 Torque wrench
^
VAG 1410 Torque wrench
^
VAG 1869/2 Brake pedal depressor
Location:
The control module is bolted to the hydraulic unit and is located on left in the engine compartment.
WARNING! Do not bend the brake lines in the area of the hydraulic unit!
Removing:
-
Request radio code on vehicles with coded radio if necessary.
-
Disconnect battery.
Remove air cleaner
