Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
Vacuum Pump: Procedures
Tandem Pump, Removing And Installing
CAUTION:
-
The fuel and the fuel lines in the fuel system can become very hot (danger of scalding).
-
The fuel system is also under pressure. Before opening the system, place cloths around the connection. Then carefully loosen the connection to
release the pressure.
-
Wear eye and hand protection when performing any type of repair work on the fuel system.
Special tools, testers and auxiliary items required
-
Torque wrench (5...50 Nm) V.A.G 1331
-
Hand vacuum pump V.A.G 1390
-
Bleed container V.A.G 1390/1
-
Spring-type clip pliers V.A.G 1921
Removing