Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-855002.png)
Note: The oil seal sealing lip must not be additionally oiled or greased.
-
Remove oil residue from camshaft journal with a clean cloth.
-
Tape over (e.g. with cellophane tape) groove in taper of camshaft. Position oil seal carefully on camshaft.
-
Press in oil seal with press piece of puller 10-203 and bolt M12 x 65 onto limit stop.
-
Install toothed belt and tension.
