volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Heating and Ventilation Controls, Removing and Installing|Page 10765 > < Heating and Ventilation Controls, Removing and Installing|Page 10763
Page 3
background image

1. Heating and ventilation controls

-

With fresh air blower switch -E9-

-

With fresh air/recirculating flap switch -E159-

2. Illumination filter
3. Trim panel
4. Fresh air control lever light -L16-

-

12 V, 1.2 W

-

Replacing:
-

Unclip trim panel -item 7- and rotary control -item 5-.

-

Pull out bulb using a piece of fuel hose.

5. Rotary control

-

For blower speed

-

To remove: Use pliers with suitable plastic or rubber protection on jaws

6. Rotary control

-

For air distribution

-

To remove: Use pliers with suitable plastic or rubber protection on jaws

7. Trim panel
8. Rotary control

-

For interior temperature control

-

To remove: Use pliers with suitable plastic or rubber protection for jaws

Cables, Installing and Adjusting

Cables, Installing And Adjusting

Heating and Ventilation Controls, Removing and Installing|Page 10765 > < Heating and Ventilation Controls, Removing and Installing|Page 10763