Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
Service Port HVAC: Description and Operation
Connections For Quick-release Coupling On Refrigerant Circuit
CAUTION:
-
There is a danger of ice-up.
-
Refrigerant may leak out if refrigerant circuit is not discharged.
-
Refrigerant must be extracted before opening refrigerant circuit.
-
Only valves and connections that are resistant to refrigerant R134a and refrigerant oil must be installed.
-
Different connections (outer diameter) for high pressure and low pressure side.
-
Always screw on sealing caps.
Extraction and filling valve with Schrader valve
A. Service connection (soldered in)
B. Schrader valve insert
C. O-ring seal (belongs to valve)
D. Sealing cap with seal
Evacuating and charging valve, high pressure side
1. Socket with external and internal threads
2. O-ring: 10.8 mm; 1.8 mm identification: black or colored
3. Evacuating and charging valve with groove for O-ring and external or internal thread M 8x1 for cap
4. O-ring for cap, 10.8 mm; 1.8 mm identification: black or colored
5. Cap
Evacuating and charging valve, low pressure side