Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-2309001.png)
Fuse Block: Service and Repair
Fuse Holder, Removing and Installing
Fuse Holder, Removing And Installing
Removing
-
Disconnect battery.
-
Carefully pry-off side cover from instrument panel (left).
-
Remove driver's side instrument panel trim.
-
Remove screws -B- (2 Nm)
-
Press locking tab -C- while doing pulling fuse holder -A- out inward.
Installing
Install in reverse order of removal, noting the following:
-
Reconnect battery.
