Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-2311003.png)
-
Inspect front wiring harness Ground (GND) torque (behind left head lamp, on frame rail).
-
Check all Ground (GND) wire terminal fasteners. Make sure they are tightened to 9 Nm.
Tip:
The following pictures are to assist in the proper location of each ground wire on each grounding stud.
-
Ground 642: Fan Control, Pre Heating Glow Plug.
-
Ground 655: Steering Wheel
