Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
-
On new tandem pump (038 145 209 E) connect fuel return hose -3- with blue mark to fuel return connection of tandem pump -4-
-
Ensure coupling is properly aligned to camshaft, install tandem pump and secure with socket head bolts -arrow A- and -arrow B-
-
Tighten upper 6mm socket head bolts - arrow A- to 20 Nm (15 ft. lbs.) and lower 5mm socket head bolts -arrow B- to 10 Nm (7 ft. lbs.)
-
Connect fuel supply hose -2- with white mark to fuel supply connection of tandem pump and secure with a spring clamp
-
Connect vacuum hose -1- to tandem pump and secure with new clamp (N 102 582 01)
-
Connect fuel supply hose -1- with white mark to fuel filter and secure with spring clamp
-
Connect suction pump VAS 5226 to fuel return hose -2- with blue mark
-
Operate suction pump until fuel comes out of fuel return hose
-
Disconnect VAS 5226 from fuel return hose, connect fuel return hose to fuel filter and secure with spring clamp
-
Reconnect central connector for pump-injector unit