volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Engine Controls/Fuel - Engine Runs Rough On Cold Start|Page 5963 > < Engine Controls/Fuel - Engine Runs Rough On Cold Start|Page 5957
Page 1
background image

Fuel Injector: Customer Interest
Engine Controls/Fuel - Engine Runs Rough On Cold Start

011013 

September 22, 2010

2010462 Supersedes T.B. Group 01 number 07-43 dated May 7, 2007 to update procedure and part numbers.

Vehicle Information

Update Programming, Engine Runs Rough On Initial Start at Temperatures Below -7°C (20°F)

Condition

Technical Background

For 2004 models:

^

Verify whether work procedures outlined in the following Technical Bulletin (depending upon model) have been performed:

^

Golf, Jetta, Jetta Wagon - TB Instance 2010461 (2004 only)

^

New Beetle - TB Instance 2010463 (2004 only)

If repairs Have Not been performed:

^

Perform appropriate repairs.

If repairs Have been performed and condition still exists:

^

Go to Installing New Injectors and Engine Control Module Update - Programming (Flashing) using Software Version Management (SVM).-->
Service

For 2005 models:

If condition exist:

^

Go to Installing New Injectors and Engine Control Module Update - Programming (Flashing) using Software Version Management (SVM).-->
Service

Production Solution

Software update and new injectors.

Service

PROCEDURE:

Installing New Injectors and Engine Control Module Update - Programming (Flashing) using Software Version Management (SVM)

Engine Controls/Fuel - Engine Runs Rough On Cold Start|Page 5963 > < Engine Controls/Fuel - Engine Runs Rough On Cold Start|Page 5957