Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
head.
-
Dismantling ignition key
-
Release lock cylinder securing lever using wire -arrow- and remove lock cylinder from steering lock housing.
1. Lock cylinder
2. Steel wire (approx. dia. 1.2 mm)
3. Securing lever
Installing
-
Insert ignition key in lock cylinder and turn to position "Drive".
-
Release securing lever using wire (approx. dia. 1.2 mm) and insert lock cylinder in steering lock housing.
NOTE: Where applicable, ensure immobilizer induction coil electrical connection orientation in lock cylinder housing guide.
-
Pull wire out of lock cylinder and ensure lock cylinder is secured properly in steering lock housing.
-
Where applicable, reconnect immobilizer reading coil electrical connector -arrow- to lock cylinder.
-
Install steering column switches and steering wheel.
-
Reconnect battery.