Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
-
Clip fuse holder mountings into battery box -1 and -2-.
-
Only after the fuse holder and positive ( B+ )terminal have been secured should the negative ( - ) terminal clamp be installed.
-
Torque negative ( - ) terminal clamp fastener to 6 Nm.
-
If necessary, reinstall cover -1- with screws -arrows-.
-
Reinstall and secure battery cover.
-
Clip positive cable into retainer.
-
Perform work steps specified in table.
Work steps required after reconnecting battery
NOTE: If desired, print and use the table above as a checklist.
Battery With Fastened Fuse Holder, Removing and Installing
Battery With Fastened Fuse Holder, Removing And Installing
WARNING: Prior to handling or servicing batteries, read, understand and observe the Warning and Safety measures for lead-acid batteries.