Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
Battery With Clipped Fuse Holder, Removing And Installing
WARNING: Prior to handling or servicing batteries, read, understand and observe the Warning and Safety measures for lead-acid batteries.
Special tools and auxiliary items needed
-
VAG 1331 Torque wrench (or equivalent 5 - 50 Nm)
Battery, removing
-
Disconnect battery.
-
Remove bolt -arrow-.
-
Remove battery hold-down bracket.
-
If present, disconnect central gas vent hose from top cover.
-
Carefully lift battery together with insulation from engine compartment.
Battery, installing
To ensure battery seats securely, only install batteries with a 10.5 mm battery foot strip and adhere to the following work sequences:
-
Install battery so battery carrier lug -arrow- engages in battery foot strip cut-out -1-.
It must not be possible to move a battery to the left or to the right.